XINGYHENG XH-W3001 DC 110V-220V 1500W 10A Microcomputer Digital Temperature Controller Digital Display Thermostat Control Switch and NTC 10K Thermistor Sensors Digital Temperature Probe

About us:
The W3001 temperature controller adopts single-chip microcomputer control system and high-precision temperature control probe,
with outstanding temperature control performance and precision. Simple control panel, wide temperature range, independent judgment of heating and cooling mode, simple setting.

Specification:
Name: Microcomputer Temperature Controller

Model: XH-W3001

Temperature Measurement Range: -50 to 110 degree centigrade

Temperature Control Range: -50 to 110 degree centigrade

Measurement Accuracy: +/- 0.2 degree centigrade

Control Accuracy: +/- 0.1 degree centigrade

Measuring input: NTC 10K L = 1M waterproof probe

Input Power: DC 12V/110V-220V

Output Power: 120W/1500W (MAX)

Output Type: Direct output (input/output synchronization)

Output Current: 10A (MAX)

Installation Pitch: 73mm (aperture 4mm)

Size: 60mmx45mmx31mm

Weight: 26g

Wiring method: W3001 of 12V/110V can be powered by a transformer or a dc power output of 12V/110V. W3001 is a direct output,
so in the case that the output end is not well connected with the load, do not power on, to prevent the current from contacting and striking.

Press the setting buton, enter the internal menu. Press the up and down to switch setting parameter.

P0: Set Start temperature. Press the up button once to display the starting temperature. Press the up button for about 3 seconds,
and the starting temperature number flashes. You can set the required temperature through the up and down keys P1: set stop temperature. Press the down button once to display the stop temperature. Press the down button for about 3 seconds and the stop temperature number will flash.

P2: Set temperature calibration. Detect temperature + corrected temperature = actual temperature

Make sure this fits by entering your model number.
Super material: W3001 intelligent thermostat is an independent product, 1.8mm thick ABS flame retardant shell, a variety of fields perfect use, convenient operation and practical Settings, is your side temperature control housekeeper.
Package including: 1 Pack of W3001 intelligent thermosta module, which is equipped with 1pcs NTC 10K temperature probe. The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling.
XH-W300 Digital Thermostat specification: Temperature control range: -50-110°C. Control accuracy of 0.1 degrees Celsius. Input power: DC 12V/110-220V. Output Power: 120W/1500W (MAX). Easy operation, to set start temperature, stop temperature, corrected temperatureTemperature correction, delay start.
High Power High Efficiency: Two Work Mode: Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature) It is precise and reliable with good long-term stability. With fixing screw hole, convenient for install and fixed. Small size, low power consumption, fast response.
A wide range of applications: Widely used in hvac, dehumidifier, test and test equipment, automobile, automatic control, weather station, humidity regulator and other related temperature detection and control.